How To Clean Mighty Vape? (Step-by-Step Guide)

How To Clean Mighty Vape

Vaping, a pleasurable and satisfying experience is a common alternative to smoking and the Mighty vape is one of the best portable vaporizers on the market. To ensure optimum performance and avoid any health risks, it is important to keep your vape clean.

We’d give you a detailed guide on how to keep your Mighty vaporizer clean to ensure optimal performance.

Cleaning a Mighty Vape

How often you use your vape is a major determinant of the number of times you’ll need to clean and sanitize it. It is also dependent on the vaping material, and at what temperature you vape.

Herbs or concentrates of low grade have more impurities, which could hasten the buildup of residue. A higher temperature setting can cause materials to vaporize faster and produce more residue.

However, according to Storz & Bickel, it’s advisable to clean your Mighty vape at least once a week.

This article will take you through the process of cleaning a Mighty vape.

Materials Needed:

  • Cotton Swabs
  • A small bowl or jar
  • A small cleaning toothbrush
  • Isopropyl alcohol (90%)
  • Paper towels or a soft cloth


Step 1: Disassemble the Mighty Vape

It is important to make sure your Mighty vape is turned off and has fully cooled down before you begin to disassemble it for cleaning. This procedure is necessary for both your security and the protection of the device.

The cooling device that is positioned on top of the vaporizer must be removed. To achieve this, unscrew it until it starts to detach. Next, take off the mouthpiece by simply twisting it counterclockwise. You should then remove the cap lock, to do this, pull up on one side while moving it to the other side. After that, the cooling unit’s base and top must be detached, it will reveal two blue seal bands.

Next, you will need to lift out the chamber screen and remove the rings with the filling chamber tool. The chamber tool can also be used to remove the bottom screen inside the chamber. The screen needs to be poked at and dented until it emerges from the chamber’s edges. The screen can also come out of the gadget by turning it on its side.

Disassemble the Mighty Vape

Image Credit: thevape

Step 2: Clean The Mouthpiece

The mouthpiece can gather scraps and residue from your vaporizer.  It can be cleaned by immersing it in isopropyl alcohol for about 30 minutes to 1 hour. You should not soak for more than an hour to prevent damage to the mouthpiece. Remove it from the alcohol, rinse it with warm water, and allow it to dry.

Step 3: Cleaning The Cooling Unit

The vapor is cooled by the cooling device before you breathe it in. Use the soft brush to scrub it and get rid of any dirt or residue from the airflow channels in the cooling unit. It should then spend about 30 minutes to 1 hour soaked in isopropyl alcohol. After that, rinse in lukewarm water and allow to air dry.

Step 4: Cleaning The Herb Chamber

The herb chamber is where you load your herbs before vaping, just like the cooling unit. To clean it, take out any dirt or dust with a soft brush and soak it in isopropyl alcohol for not more than an hour. Dip a cotton bud in alcohol and clean the inside of the chamber if there are still leftover residues, then air dry.


Step 5: Clean the Screen

The bottom screen is responsible for filtering any detritus or particles from your vapor. If the screen on the cooling unit is dirty, submerge it for a few minutes in a tiny bowl or container of isopropyl alcohol. With the screen removed from the alcohol, use a small cleaning brush to carefully scrub it. Give it a thorough rinse with water and allow it to air dry.

Reassembling the Mighty Vape

Image Credit: ebay

Step 6: Reassembling the Mighty Vape

It can be a little tricky to put your vaporizer back together after cleaning it. Once you’ve cleaned all parts of the Mighty Vape, be sure to allow them to dry fully before putting it together. To completely dry all the components, use paper towels or a soft towel.

Once all the units of your Mighty Vape are clean and dry, proceed to reassemble them by reattaching the bottom screen to the cooling device first. Next, secure the cooling unit to the device, place the herb chamber back in place, and lastly the mouthpiece.

Step 7: Test the Mighty Vape

Turn on the vape by pressing the power button. Confirm that the vape is correctly heating up and that the battery indicator light is on.

Test the airflow and the vapor output by taking a few drags from the vape, and be certain the vape is producing enough vapor and has superb flavor. You might also need to run a few burn-off rounds to guarantee that you’ve gotten rid of any extra alcohol that might still be in the vape or on its parts. Set the Mighty to its highest setting, then let it go through a few rounds of maximum heating until you no longer detect any alcohol odor.

Once you don’t detect any alcohol odor and you can feel the vapor entering your mouth and lungs smoothly, then you’re good to go. However, in a situation where the vapor is harsh or you are not getting enough vapor, it might be necessary to adjust the temperature or pack the chamber more closely.


Finally, for a satisfying vaping experience, maintaining your Mighty Vape after cleaning is essential. For best results, always reassemble your vape device correctly, check your battery, use premium e-liquids, change your coils, clean your chambers, and use appropriate wattage for maximum performance. These suggestions will help you prolong the lifespan of your device and consistently provide a   great vaping experience.

Keep in mind to clean your device frequently to extend its lifespan and avoid any issues with flavor or vapor production.


Rosedalekb Vape New Posts

Rosedalekb Vape

Your Premier Vape OEM Manufacturer

If You Need Any Vape OEM/ODM, Boom Your Business, You’ve Come To the Right Place!

More On Rosedalekb Vape